How to install your LED Neon sign using our Stand-off screws.
The mounting screws are great for surface installations like walls for example - this is our most commonly selected installation method.Step 1:
Take your sign only and place it flat up against the intended wall or space (if it’s super long or heavy please ask a friend for assistance).
Step 2:
While one person is holding the sign, use a marker pen to dot holes in the wall where the mounting holes have been drilled in the acrylic backing - this will be super helpful when you get the drill out next.
Step 3:
Place the sign back in the box or on a safe surface to avoid scratching the acrylic backing - get your drill equipped with a twist drill bit and drill pilot holes exactly on the points you marked out in step 2.
Step 4:
Pick up the mounting pin and unscrew it. Take the hollow base of the mounting pin and place it up against the previously drilled pilot hole, place the smaller silver securing screw through the hollow entry. Now with a new screwdriver drill bit, screw the small silver securing screw directly through the hollow base and into the wall securing the hollow base to the wall. Repeat this until all hollow bases are secured on the wall.
Step 5:
Now get your sign and place it up against these bases and hopefully you’ve lined them up correctly. Then simply grab the remaining wider screw and screw into each base securing the sign to the wall - make sure they’re tight!
Final Step:
You’re all done! Now plug the sign into the transformer (black/white box), and then into the wall outlet and it should illuminate no problem.
Price is per screw.
Safely Packed & Fully insured.
Don’t worry! We’ve got you covered until you receive your sign, and put it on your wall!
Simple to hang.
We provide a free wall screw kit with each sign, it’s like hanging a painting!
Plug-in and play!
Simply plug your sign in to light up! We’ll provide the correct plug for your location too!